Cisco Cisco 5508 Wireless Controller 기술 참조
26
Cisco Aironet 1600/2600/3600 Series Access Point Deployment Guide
Unique Installations
Figure 29
Installation of an AP onto an Electrical Conduit Box
Ethernet Cable Recommendation
While the AP 1600/2600 and the AP 3600 work well with CAT-5e for new cable installations, Cisco
recommends that customers use CAT6a because CAT6a cable is required by the 10GE standard.
recommends that customers use CAT6a because CAT6a cable is required by the 10GE standard.
Antenna Cable Recommendation
Keep antenna cable runs as short as possible. Cisco offers low loss (LL) and ultra low loss (ULL) cables,
which have the same characteristics as Times Microwave LMR-400 and LMR-600.
which have the same characteristics as Times Microwave LMR-400 and LMR-600.
Note
When drilling holes for cable, allow for the size of connector drill bit, which is typically 5/8”. (See
Figure 30
Cable Installation, with Allowance for Connector
Cisco cables carry the part number AIR-CAB (Aironet Cable) and then a length. For example, a 20’
length of LL cable with RP-TNC connector is Cisco AIR-CAB-020LL-R. These heavy black cables are
not Plenum rated and are primarily for use outdoors or in manufacturing areas.
length of LL cable with RP-TNC connector is Cisco AIR-CAB-020LL-R. These heavy black cables are
not Plenum rated and are primarily for use outdoors or in manufacturing areas.