Cisco Cisco Aironet 1552WU Outdoor Access Point 릴리즈 노트
4
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(2)JB5
System Requirements
Figure 1
Network Interfaces: Radio Settings Page
Step 2
Choose Disable to disable the radio.
Step 3
Click Apply at the bottom of the page.
Step 4
If your access point has two radios, repeat these steps for the second radio.
Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the
access point CLI:
access point CLI:
If your access point has two radios, repeat these steps for the second radio. Use the no form of the
shutdown command to enable the radio.
shutdown command to enable the radio.
Command
Purpose
Step 1
configure terminal
Enters global configuration mode.
Step 2
interface dot11radio {0 | 1}
Enters interface configuration mode for the radio interface. The
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.
Step 3
shutdown
Disables the radio port.
Step 4
end
Returns to privileged EXEC mode.
Step 5
copy running-config startup-config (Optional) Saves your entries in the configuration file.