Cisco Cisco Aironet 1552WU Outdoor Access Point 릴리즈 노트
5
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(2)JB5
New Features
Supported Browsers
The following browsers are supported:
•
Internet Explorer 8.x and later.
•
Firefox 3.x and later.
New Features
Cisco IOS Release 15.2(2)JB has the following new features, which are also present in 15.2(2)JB5:
•
•
•
•
•
•
•
Spectrum Expert Mode
The Spectrum Expert mode is supported in all CleanAir-enabled access points such as the AP3500,
AP3600, AP2600, and AP1550 series. When configured as a dedicated Spectrum Sensor, a Spectrum
Expert Connect autonomous access point can be connected to the Cisco Spectrum Expert. Spectrum
Expert Mode is a separate mode and is not a subset of the Monitor Mode.
AP3600, AP2600, and AP1550 series. When configured as a dedicated Spectrum Sensor, a Spectrum
Expert Connect autonomous access point can be connected to the Cisco Spectrum Expert. Spectrum
Expert Mode is a separate mode and is not a subset of the Monitor Mode.
To enable the Spectrum Expert Mode, follow these steps:
Step 1
Choose Home > Easy Setup > Network Configuration.
Step 2
From the Role in Radio Network drop-down list choose Spectrum.
Step 3
Click Apply.
Step 4
Launch the Spectrum Expert by clicking on the Spectrum Expert Icon.
You can also enable the Spectrum Expert Mode by following these steps:
Step 1
Choose Network > Network Interface.
Step 2
Click Radio0-802.11n 2G.Hz or Radio0-802.11n 5G.Hz
Step 3
Click Settings.
Step 4
Click the Spectrum radio button.
Step 5
Click Apply.
Step 6
Launch the Spectrum Expert by clicking on the Spectrum Expert Icon.