Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(13)JA4

OL-5847-01

Important Notes

Follow these steps to disable the radio interfaces using the web-browser interface:

Step 1

Browse to the Network Interfaces: Radio Settings page.

Figure 2

shows the top portion of the Network

Interfaces: Radio Settings page.

Figure 2

Network Interfaces: Radio Settings Page

Step 2

Click Disable to disable the radio.

Step 3

Click Apply at the bottom of the page.

Step 4

If your access point has two radios, repeat these steps for the second radio.

Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the CLI:

If your access point has two radios, repeat these steps for the second radio. Use the no form of the
shutdown command to enable the radio port.

Throughput Option for 802.11g Radio Blocks Association by 802.11b Clients

When you configure the 802.11g access point radio for best throughput, the access point sets all data
rates to basic (required). This setting blocks association from 802.11b client devices. The best
throughput option appears on the web-browser interface Express Setup and Radio Settings pages and
in the speed CLI configuration interface command.

Command

Purpose

Step 1

configure terminal

Enter global configuration mode.

Step 2

interface dot11radio { 0 | 1 }

Enter interface configuration mode for the radio interface. The
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.

Step 3

shutdown

Disable the radio port.

Step 4

end

Return to privileged EXEC mode.

Step 5

copy running-config startup-config (Optional) Save your entries in the configuration file.