Cisco Cisco Aironet 1260 Access Point 릴리즈 노트

You cannot use HTTPS file transfer to upgrade to Cisco IOS Release 15.2(2)JB from previous releases. 
Because of the image size for this release, you must use TFTP or FTP file transfer for the upgrade. Refer 
to the upgrade instructions at this URL:

These release notes contain the following sections:

The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between 
wireless and wired networks or as the center point of a standalone wireless network. In large 
installations, the roaming functionality provided by multiple access points enables wireless users to 
move freely throughout the facility while maintaining uninterrupted access to the network. 

You can install the 32 MB Cisco IOS Release 15.2(2)JB2 on all 1260, 1040, 1140, 3500i, 3500e, 3600i, 
3600e, 2600i, 2600e, 1600i, 1600e, and 1550 series access points.

To find the version of Cisco IOS software that is running on your access point, use a Telnet session to 
log into the access point, and enter the show version EXEC command. This example shows command 
output from an access point that is running Cisco IOS Release 15.2(2)JB2:

ap1260AG> show version

Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 15.2(2)JB2

Copyright (c) 1986-2010 by Cisco Systems, Inc.

On access points running Cisco IOS software, you can also find the software release on the System 
Software Version page in the access point’s web-browser interface. If your access point does not run 
Cisco IOS software, the software release appears at the top left of most pages in the web-browser 
interface.