Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
12
Documentation Updates
OL-3240-01
Documentation Updates
Documentation Updates
This section describes errors, changes, and omissions for the access point user documentation.
Errors
The screen shot on page 18 in the Quick Start Guide: Cisco Aironet 1200 Series Access Points mistakenly
shows that the Ensure Compatibility With 2Mb/sec Clients or non-Aironet 802.11 setting is available for
the 5-GHz radio module on the Express Setup page. However, this setting is available only for the
2.4-GHz internal radio and is not available for the 5-GHz radio module.
shows that the Ensure Compatibility With 2Mb/sec Clients or non-Aironet 802.11 setting is available for
the 5-GHz radio module on the Express Setup page. However, this setting is available only for the
2.4-GHz internal radio and is not available for the 5-GHz radio module.
shows a corrected
screen shot of the Express Setup page.
Figure 2
Corrected Screen Shot of the Express Setup Page
Omissions
The Rogue AP Alert Timeout setting on the Association Table Advanced page is reserved for future use.
Currently, this feature is not supported, and it has no effect on access point performance.
Currently, this feature is not supported, and it has no effect on access point performance.