Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

CSCdz76044—The Network Map page in the access point GUI incorrectly lists 1230 access points 
as client devices rather than as access points.

CSCdz76076—The Refresh button on the Network Map page in the access point GUI does not 
refresh the page. Workaround: Use the refresh button on your browser to refresh the Network Map 
page.

CSCdz80894—The statistics counters for packets received over the radio interfaces on the Network 
Interfaces page always indicate 0 regardless of the number of packets received.

CSCdz84002—When you attempt to load an unsupported file format for the New Startup 
Configuration File in the access point GUI, the access point sometimes loses its bridge virtual 
interface (BVI). Workaround: Press and hold the MODE button on the back of the access point to 
reload the configuration.

CSCdz84370—Access points that are not running IOS (340, 350, and 1200 series access points) 
cannot serve as the parent for a 1230 access point in repeater mode.

CSCdz88122—If the parent of a repeater access point shuts down, the repeater does not roam to 
another parent access point until the repeater reboots.

CSCdz89120—The Use Daylight Savings Time button on the Services: NTP page does not adjust 
the access point clock to Daylight Saving Time.

No caveats are resolved in Cisco IOS Release 12.2(8)JA.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. Select Wireless LAN under Top Issues.

This section lists documents related to Cisco IOS Release 12.2(4)JA and to 1100 series access points.

These documents describe installation and configuration of 1100 and 1200 series access points: