Cisco Cisco Aironet 1040 Series Access Point 릴리즈 노트
2
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 15.2(2)JB6
Contents
Warning
Install only Cisco IOS Release 15.3(3)JA1 and newer releases on Cisco Aironet Universal Access
Point models. Do not install older Cisco IOS releases on Cisco Aironet Universal Access Point models
as that is a violation of local radio regulations and laws.
Point models. Do not install older Cisco IOS releases on Cisco Aironet Universal Access Point models
as that is a violation of local radio regulations and laws.
Contents
These release notes contain the following sections:
•
•
•
•
•
•
•
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
System Requirements
You can install the 32 MB Cisco IOS Release 15.2(2)JB6 on all 1260, 1040, 1140, 3500i, 3500e, 3600i,
3600e, 2600i, 2600e, 1600i, 1600e, and 1550 series access points.
3600e, 2600i, 2600e, 1600i, 1600e, and 1550 series access points.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software that is running on your access point, use a Telnet session to
log into the access point, and enter the show version EXEC command. This example shows command
output from an access point that is running Cisco IOS Release 15.2(2)JB6:
log into the access point, and enter the show version EXEC command. This example shows command
output from an access point that is running Cisco IOS Release 15.2(2)JB6:
ap1260AG> show version
Cisco IOS Software, C1260 Software (AP3G1-K9W7-M), Version 15.2(2)JB6
Copyright (c) 1986-2014 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.