Cisco Cisco Aironet 1040 Series Access Point 릴리즈 노트

Choose Disable to disable the radio.

Click Apply at the bottom of the page.

If your access point has two radios, repeat these steps for the second radio.

Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the 
access point CLI:

If your access point has two radios, repeat these steps for the second radio. Use the no form of the 
shutdown command to enable the radio. 

These browsers are supported:

Internet Explorer 8.x and later

Firefox 3.x and later

This section lists the new features and supported platforms in Cisco IOS Release 15.2(4)JB3a.

The proxy Mobile-IP feature is not supported in Cisco IOS Release 12.3(2)JA and later.

This release supports the following new access point platforms:

Cisco Aironet 1530 Series Outdoor Access Points

Supported models are 1532I and 1532E

For Cisco Aironet 1530 Series access points, you are required to load the Cisco IOS version 
15.2(4)JB3b. This IOS version applies only to Cisco Aironet 1530 Series access points.

Enters global configuration mode.

interface dot11radio {0 | 1}

Enters interface configuration mode for the radio interface. The 
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.

Disables the radio port.

Returns to privileged EXEC mode.

copy running-config startup-config (Optional) Saves your entries in the configuration file.