Cisco Cisco Aironet 1700i Access Points 설치 가이드

To unpack the access point, follow these steps:

Unpack and remove the access point and the accessory kit from the shipping box.

Return any packing material to the shipping container and save it for future use.

Verify that you have received the items listed below. If any item is missing or damaged, contact 
your Cisco representative or reseller for instructions.

The access point

Mounting bracket (only if selected when you ordered the access point)

Adjustable ceiling-rail clip (only if selected when you ordered the access point)

The 1700 series access point contains two radios, a 2.4 GHz 802.11n MIMO radio and a 5 GHz 
802.11ac MIMO radio, with integrated dual-band antennas.

For information on the regulatory domains (shown as “x” in the model numbers) see 

The 1702I model access point is configured with dual-band inverted-F antennas, and two 
2.4-GHz/5-GHz dual-band radios.

There are antennas deployed inside the access point with one deployed on each corner of the 1702I 
access point top housing. Each antenna covers both the 2.4 GHz and the 5 GHz bands with a single 
feed line. The basic features are as follows:

Dual-band inverted-F antenna for use in both the 2.4-GHz and 5-GHz bands.

Antenna unit integrated into the access point.

Peak gain is approximately 4 dBi in both 2.4 GHz and 5 GHz bands.

The 1700 series supports the following regulatory domains (shown as “x” in the model numbers):

-A, -C, -D, -E, -F, -H, -I, -K, -N, -Q, -R, -S, -T, -Z