Cisco Cisco Aironet 1040 Series Access Point 릴리즈 노트
7
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Releases 12.4(25d)JA and 12.3(8)JEE
OL-23880-01
Installation Notes
Note
Use the c3201-k9w7-tar autonomous image for 3201 WMIC.
WGB Wireless Client Support
The WGB wireless client support feature allows the WGB to retain the connectivity to wireless clients
in the other radio even if it lost its uplink in the current radio.
in the other radio even if it lost its uplink in the current radio.
Installation Notes
This section contains information that you should keep in mind when installing 1040, 1130, 1140, 1240,
1250 and 1260 series access points, and 1300 and 1400 access points/bridges.
1250 and 1260 series access points, and 1300 and 1400 access points/bridges.
Access Points
This section contains installation notes for access points.
Installation in Environmental Air Space
Cisco Aironet 1040, 1130, 1140, 1240, 1250 and 1260 Series Access Points provide adequate fire
resistance and low smoke-producing characteristics suitable for operation in a building's environmental
air space, such as above suspended ceilings, in accordance with Section 300-22(C) of the National
Electrical Code (NEC) and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part
1, C22.1.
resistance and low smoke-producing characteristics suitable for operation in a building's environmental
air space, such as above suspended ceilings, in accordance with Section 300-22(C) of the National
Electrical Code (NEC) and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part
1, C22.1.
Caution
The power injector does not provide fire resistance and low smoke-producing characteristics and is not
intended for use in extremely high or low temperatures or in environmental air spaces such as above
suspended ceilings.
intended for use in extremely high or low temperatures or in environmental air spaces such as above
suspended ceilings.
Antenna Installation
For instructions on the proper installation and grounding of external antennas for 1260 series access
points, refer to the National Fire Protection Association’s NFPA 70, National Electrical Code, Article
810, and the Canadian Standards Association’s Canadian Electrical Code, Section 54.
points, refer to the National Fire Protection Association’s NFPA 70, National Electrical Code, Article
810, and the Canadian Standards Association’s Canadian Electrical Code, Section 54.
Warning
Do not install the antenna near overhead power lines or other electric light or power circuits, or
where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, as they may cause serious injury or death.
where it can come into contact with such circuits. When installing the antenna, take extreme care
not to come into contact with such circuits, as they may cause serious injury or death.