Cisco Cisco Aironet 1040 Series Access Point 설치 가이드

(Optional) Use a hammer to tap the tabs on the long support into the ceiling tile. Support the tile while 
you tap in the tabs to prevent breaking the tile.

Some building or electrical codes might require you to install a support wire to ensure that the access 
point cannot fall from the ceiling. If your codes require a support wire, loop the wire through the 
rectangular holes in the support bracket, capturing both the bracket and the long support piece, and attach 
the wire to a solid structure in your ceiling.

(Optional) Use a Kensington lock to secure the access point to a solid structure in your ceiling. 

 

shows the hole in the mounting bracket that you use to attach the Kensington lock.

Connect cabling to the access point and replace the ceiling tile.

Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks 
can be found at 

. Third party trademarks mentioned are the property of their respective owners. The use of the word 

partner does not imply a partnership relationship between Cisco and any other company. (1005R)

© 2010 Cisco Systems, Inc. All rights reserved.

281701