Cisco Cisco Aironet 1040 Series Access Point 설치 가이드
3
Cisco Flush-Mount Kit for Tiled Ceilings
OL-19393-01
Installing the Mounting Kit
Figure 1
Tab order for snapping the bezel onto the access point
Step 6
Turn the access point upside down on your work surface and put two objects (books or wooden blocks,
for example) beside it to support the ceiling tile.
for example) beside it to support the ceiling tile.
Step 7
Hold the ceiling tile upside down and put it on top of the access point and support blocks.
Step 8
Put the long support piece across the center of the tile and the access point. This piece bears the weight
of the access point when you put the tile in the ceiling.
of the access point when you put the tile in the ceiling.
Step 9
(Optional) The long support piece is made for 24” (610 mm) ceiling tiles. If your ceiling tiles are 23.62”
(600 mm) wide, use pliers to snap the removable tips off each end of the long support piece.
(600 mm) wide, use pliers to snap the removable tips off each end of the long support piece.
shows the removable tabs.
Figure 2
Removable tabs on the long support piece
281699
1
6
4
5
2
3
281700
Removable
tabs