Cisco Cisco Aironet 2800i Access Point 설치 가이드
24
12
Checking the Access Point LEDs
The location of the access point status LED is shown in
.
Note
Regarding LED status colors, it is expected that there will be small variations in color intensity
and hue from unit to unit. This is within the normal range of the LED manufacturer’s
specifications and is not a defect.
and hue from unit to unit. This is within the normal range of the LED manufacturer’s
specifications and is not a defect.
The access point status LED indicates various conditions and are described in
.
13
Miscellaneous Usage and Configuration Guidelines
Using the Mode Button
Using the Mode button (see
) you can:
Table 2
LED Status Indications
Message Type
LED State
Message Meaning
Association status
Green
Normal operating condition, but no
wireless client associated
wireless client associated
Blue
Normal operating condition, at least one
wireless client association
wireless client association
Boot loader status
Green
Executing boot loader
Boot loader error
Blinking Green
Boot loader signing verification failure
Operating status
Blinking Blue
Software upgrade in progress
Alternating between Green
and Red
and Red
Discovery/join process in progress
Cycling through
Red-Off-Green-Off-Blue-Off
Red-Off-Green-Off-Blue-Off
Access point location command invoked
from controller web interface.
from controller web interface.
Access point operating
system errors
system errors
Cycling through
Blue-Red-Green-Off
Blue-Red-Green-Off
General warning; insufficient inline power