Cisco Cisco Aironet 1810w Access Point 설치 가이드
4
•
The AP supports the following hardware external interfaces:
–
Three local GigE Ethernet Ports, one uplink GigE port, and one passive pass-through RJ45
port.
port.
–
One 10/100/1000BASE-T PoE uplink port.
–
RS-232 management console interface through RJ-45.
–
Three 10/100/1000BASE-T ports (local Ethernet ports), one of which also serves as a PoE-Out
port.
port.
The PoE-Out port provides 802.3af power when the AP is powered by Cisco local power
supply (AIR-PWR-D=) and ~6.5W power when the AP is powered by 802.3at power. The
PoE-Out port does not provide any power output when the AP is powered by 802.3af power.
supply (AIR-PWR-D=) and ~6.5W power when the AP is powered by 802.3at power. The
PoE-Out port does not provide any power output when the AP is powered by 802.3af power.
–
DC power connector.
–
One RJ-45 passive pass-through port (back to bottom).
–
Mode button. For information on how to use the Mode button, see
–
One multi-color LED status indicator for the AP status. LEDs are also present to indicate
per-port status for local the Ethernet ports. For information, see the
per-port status for local the Ethernet ports. For information, see the
–
Three local Gigabit Ethernet ports available to securely connect wired devices to the network.
•
Two integrated 2.4 GHz/5 GHz dual-band antennas located on the sides of the 1810W access
point under the top housing. Peak antenna gain is approximately 2 dBi and 4 dBi in the 2.4 GHz
and 5 GHz bands respectively.
point under the top housing. Peak antenna gain is approximately 2 dBi and 4 dBi in the 2.4 GHz
and 5 GHz bands respectively.
A full listing of the access point's features and specification are provided in the Cisco Aironet 1810W
Series Access Point Data Sheet, at the following URL:
Series Access Point Data Sheet, at the following URL:
Access Point Model Numbers and Regulatory Domains
The Cisco Aironet 1810W series access point comes in the model number format AIR-AP1810W-x-K9.
The ‘x’ in the model number is a placeholder for the regulatory domain. For information on supported
regulatory domains, see the following page:
The ‘x’ in the model number is a placeholder for the regulatory domain. For information on supported
regulatory domains, see the following page: