Cisco Cisco Aironet 3500p Access Point 설치 가이드
Installing the Antenna
10
Cisco Aironet Six-Element Dual-Band MIMO Patch Array Antenna (AIR-ANT25137NP-R)
OL-23461-01
•
A pencil
Mounting on a Wall or Ceiling
Follow these steps to mount your antenna on a wall or ceiling.
Step 1
Remove the antenna and bracket from the shipping container. The antenna and
bracket are attached and the bracket is locked in place to facilitate shipping.
bracket are attached and the bracket is locked in place to facilitate shipping.
Step 2
Use a 10-mm wrench to loosen and remove the adjustment bolt from the shipping
position (
position (
).
Figure 3
Moving the Adjustment Bolt from the Shipping Position
Step 3
Reinsert the adjustment bolt in the adjustment slot and tighten it only slightly.
Step 4
Determine the mounting location for the antenna.
Note
The fasteners and mounting surface should be capable of maintaining a
minimum pullout force of 150 pounds (68 kg) to support the weight of the
antenna plus the potential wind loading on the antenna.
minimum pullout force of 150 pounds (68 kg) to support the weight of the
antenna plus the potential wind loading on the antenna.