Cisco Cisco Aironet 1400 Wireless Bridge 릴리즈 노트
7
Release Notes for Cisco Aironet 1410 Bridges for Cisco IOS Release 12.2(13)JA
OL-4530-01
Troubleshooting
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Click Technology Support, select Wireless from
the menu on the left, and click Wireless LAN.
Documentation Updates
The Cisco Aironet 1400 Series Wireless Bridge Mounting Instructions provides detailed instructions for
installing and mounting the bridge.
installing and mounting the bridge.
Stacking Bridges Section Changes
The separation distance between the two stacked bridge antennas is a minimum of 6.56 feet (2 meters).
New Transmit Power Options for Low-Power Bridges
If your bridge is configured at the factory for use in a regulatory domain other than North America or
Korea, the transmit power options for the power local command differ from the power options listed in
the Cisco Aironet 1400 Series Bridge Software Configuration Guide and in the Cisco IOS Command
Reference for Cisco Aironet Access Points and Bridges. The transmit power options for low-power
bridges are 16, 13, 12, 10, 9, 8, 7, and 4 dBm. Note that the maximum transmit power for your bridge
depends on your regulatory domain.
Korea, the transmit power options for the power local command differ from the power options listed in
the Cisco Aironet 1400 Series Bridge Software Configuration Guide and in the Cisco IOS Command
Reference for Cisco Aironet Access Points and Bridges. The transmit power options for low-power
bridges are 16, 13, 12, 10, 9, 8, 7, and 4 dBm. Note that the maximum transmit power for your bridge
depends on your regulatory domain.
New Suspend Option in Bridge Protocol IEEE Command
The bridge protocol ieee command, which enables Spanning Tree Protocol (STP) on the bridge, now
contains a suspend option. This option suspends STP on the bridge until you re-enable it.
contains a suspend option. This option suspends STP on the bridge until you re-enable it.
New Event Messages
lists new event messages added to the Error and Event Messages appendix in the Cisco Aironet
1400 Series Bridge Software Configuration Guide.
Table 1
New Event Messages
Message
Explanation
Recommended Action
Software Auto Upgrade Messages
AUTO_INSTALL_STATION_ROLE
The radio is operating in automatic
installation mode.
installation mode.
Use the station-role command to change
the role in radio network setting for the
radio.
the role in radio network setting for the
radio.