Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트
12
Release Notes for Cisco Aironet 1300 Series Outdoor Access Point/Bridge for Cisco IOS Release 12.3(4)JA
OL-7096-01
Caveats
Note
Setting the port to 10 Mbps will most likely degrade throughput.
•
The connecting port should never be set to full duplex.
Failure to follow these guidelines will result in lost data due to late collisions, CRC errors, etc.
Caveats
This section lists
in Cisco IOS Release 12.3(4)JA for the access
point/bridge.
Open Caveats
These caveats are open in Cisco IOS Release 12.3(4)JA for the access point/bridge:
•
CSCeb52431—When logging into a TACACS+ server, access points sometimes send hundreds of
additional authentication requests to the server after a successful authentication.
additional authentication requests to the server after a successful authentication.
•
CSCsa53019—UDP traffic performance problem when using WEP.
When WEP is used with UDP traffic, a throughput input is experienced in the Ethernet interface. If
the show interface fastethernet 0 command is executed, throttle counters increase but no high CPU
or buffers failure occurs.
the show interface fastethernet 0 command is executed, throttle counters increase but no high CPU
or buffers failure occurs.
•
CSCeh29970—EAP authentication appears to fail at reload when SSID configured with WPA+TKIP
with EAP-FAST as the authentication mechanism.
with EAP-FAST as the authentication mechanism.
An authentication failed message appears at the time of reload, but after a few seconds, the
authentication succeeds without any configuration change or change in the client’s profile.
authentication succeeds without any configuration change or change in the client’s profile.
Resolved Caveats
These caveats are resolved in Cisco IOS Release 12.3(4)JA for the access point/bridge:
•
CSCee90230—Traceback no longer occurs at reboot when access point is configured for TACACS+
administrator authentication.
administrator authentication.
•
CSCeb82510—You can now configure authentication, authorization, and accounting (AAA)
methods for telnet and HTTP independent of the console.
methods for telnet and HTTP independent of the console.
•
CSCec12884—The AAA user command authorization no longer fails through HTTP access.
•
CSCee42617—Users are now correctly authenticated through the RADIUS server, and accounting
information is sent to the RADIUS server.
information is sent to the RADIUS server.
•
CSCee87287—Access points no longer fail to generate accounting records when a wireless client is
re-authenticated on an automatic interval (for example, when the access point is configured using
the dot1x reauthentication seconds command).
re-authenticated on an automatic interval (for example, when the access point is configured using
the dot1x reauthentication seconds command).
•
CSCef11167—Response value of 4294967292 when polling Dot11ActiveWireless Clients via
SNMP no longer occurs.
SNMP no longer occurs.
•
CSCef45010—The GUI now performs normally when half duplex and a specified speed are part of
its configuration.
its configuration.