Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트

This section describes important information about the access point.

When you open the 1310 interface, you must enter a username and password. The default username for 
administrator login is Cisco, and the default password is Cisco. Both the username and password are case 
sensitive.

The proxy Mobile-IP feature is not supported in Cisco IOS Release 12.3(2)JA.

Cisco IOS Release 12.3(2)JA does not support this feature.

Ethernet port settings on the 1300 must be set to auto speed and auto negotiation. If you use any other 
setting, the GUI operates very slowly. For additional information, caveat CSCef45010 in the 

.

The new Express Security page in the 1310 web-browser interface makes it easier to create SSIDs and 
assign security settings to them. 

 shows the Express Security page.

Limitations of the Express Security page include:

You cannot edit SSIDs. However, you can delete SSIDs and re-create them.

You cannot assign SSIDs to specific radio interfaces. The SSIDs that you create are enabled on all 
radio interfaces. To assign SSIDs to specific radio interfaces, use the Security SSID Manager page.

You cannot configure multiple authentication servers. To configure multiple authentication servers, 
use the Security Server Manager page.

You cannot configure multiple WEP keys. To configure multiple WEP keys, use the Security 
Encryption Manager page.

You cannot assign an SSID to a VLAN that is already configured on the access point. To assign an 
SSID to an existing VLAN, use the Security SSID Manager page.

You cannot configure combinations of authentication types on the same SSID (such as MAC address 
authentication and EAP authentication). To configure combinations of authentication types, use the 
Security SSID Manager page.