Cisco Cisco Aironet 350 Wireless Bridge 문제 해결 가이드
l −− downLoad file into DRAM
u −− Upload file
p −− xfer Protocol
n −− coNsole
r −− Run
s −− System info.
Note: The menus are case−sensitive, and there is no command prompt like those seen in a Windows
or UNIX command shell.
Press Ctrl−Z to display the hidden reformat menu. These menu items display:
or UNIX command shell.
Press Ctrl−Z to display the hidden reformat menu. These menu items display:
U −− Upgrade bootstrap from file.
!−−− FORMAT memory bank.
3.
Press ! (the exclamation mark key, Shift−1) to erase the contents of Flash memory and make room for
the new firmware.
the new firmware.
!−−− FORMAT memory bank.
4.
Press 3 to select the Flash memory bank.
FORMAT Memory Bank:
1 −− DRAM
2 −− Config
3 −− FLASH
5.
Press Y to confirm
FORMAT
.
Caution: This step erases all files in the bank.
Y −− *FORMAT*
N −− CANCEL
When the Flash memory is erased, the system displays the updated contents of all memory types.
Memory Bank total used left
DRAM 16742624 0 16742624
Config 524288 292 523996
FLASH 7602176 0 7602176
M
Memory Bank:File address size encoding type flags
a) Config:AP Installation Key FF820000 80 none Key 0000
b) Config:AWC_ConfigDB FF820050 212 AiroDB1 Data 0000
6.
Choose a file transfer protocol in order to set up for the file transfer.
At the main menu, press p to select the transfer protocol.
c −− Copy file
f −− File dir
l −− downLoad file into DRAM
u −− Upload file
p −− xfer Protocol
n −− coNsole
r −− Run
s −− System info.
!−−− FORMAT memory bank.
a.
7.