Cisco Cisco Aironet 350 Access Points 릴리즈 노트

Click this link to consult the Cisco Aironet Access Point Software Configuration Guide for more 
information on this feature:

Ability to combine MAC-Based, EAP, and 802.11 Open Authentication.

With firmware version 11.21, you can set up access points and bridges to authenticate client devices 
using a combination of MAC-based and EAP authentication. When you enable this feature, client 
devices that associate to the access point or bridge using IEEE 802.11 open authentication first 
attempt MAC authentication; if MAC authentication succeeds, the client device joins the network. 
If MAC authentication fails, the access point or bridge waits for the client device to attempt EAP 
authentication. Click this link to consult the Cisco Aironet Access Point Software Configuration 
Guide for more information on this feature:

Ability to use SNMP commands to manage firmware and configuration files.

With firmware version 11.21, you can use SNMP object identifiers (OIDs) added to the access point 
and bridge MIB (AWCVX-MIB.my) to manage firmware and configuration files. You can find the 
latest version of the access point and bridge MIB at this URL:

The new OIDs correspond directly to buttons on the browser-based user interface. 

 lists and 

describes the new OIDs.

bootconfigCmdInvokeIniLoad 
(bootconfigCmdStatusIniLoad 
provides status for Load command)

Load Now button on the Boot 
Server Setup page; Read 
Config File From Server 
button on the System 
Configuration Setup page

Tells the access point or bridge 
to read an .ini file from the 
BOOTP, DHCP, or default file 
server.

awcFileXferCmdInvokeFileLoad 
(awcFileXferCmdStatusFileLoad 
provides status for Load command)

Update From Server button 
on the Update All Firmware 
From File Server page; Fully 
Update Firmware From File 
Server button on the Cisco 
Services Setup page

Tells the access point or bridge 
to load all firmware 
components from the default 
file server.

awcFileXferCmdInvokeFileSave 
(awcFileXferCmdStatusFileSave 
provides status for Save command)

Save to Server button on the 
Update All Firmware From 
File Server page

Tells the access point or bridge 
to save all firmware 
components to the default file 
server.

cmdInvokeGetWebUI 
(cmdStatusGetWebUI provides 
status for the GetWebUI command)

Load Now button on the Web 
Server Setup page

Tells the access point or bridge 
to load the auxiliary user 
interface pages specified on the 
Web Server Setup page.