Cisco Cisco Aironet 350 Access Points 릴리즈 노트

The following is a status of caveats published in the release notes for previous versions that were not 
resolved in version 12.03T:

CSCdz04380—Incorrect values are advertised for CWMin and CWMax on Voice VLAN.

This caveat is postponed. The issue is to be resolved in a future maintenance release for VxWorks 
access points and will advertise the CWMin and CWMax values as defined by IEEE 802.11e.

CSCdy11906—When WEP is enabled and you set all WEP keys to not set, WEP is still enabled but 
the web-browser page indicates that WEP is disabled.

This caveat is closed. Disable encryption by changing the WEP setting instead of removing the key.

CSCin18914—IP release or renew not occurring with EAP-TLS+MIC+KH+BWR.

This caveat is closed. Instances of DHCP failure are no longer occurring.

CSCdy27831—Access point must be rebooted after you set the Ethernet Unicast Filter to 
disallowed.

This caveat is closed.

CSCdy29556—Symbol IP phone continuously associates and authenticates to an access point 
configured with multiple VLANs.

This caveat is closed. See 

 for additional information.

CSCdz43069—Symbol phone not working when multicast or FTP traffic is passed.

This caveat is closed. See 

 for additional information.

CSCdz58192—Root bridges with LEAP enabled on the native VLAN must have the security setting 
matching that set on the Advanced Radio Setup page.

This caveat is a duplicate of CSCdz03100, which is resolved in version 12.03T.

CSCdy73695—An error is displayed when a repeater access point receives packets from a root 
access point while attempting to associate.

This caveat is closed due to lack of severity.

CSCdy76093—Proxy Mobile IP with multiple authoritative access points continuously sends 
update packets.

This caveat is closed.

CSCdw89705—All Ethernet devices behind a client bridge show up as roamed.

This caveat is closed. No further action is planned.

For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at 

. In the Tools and Utilities section, Select Wireless Troubleshooting Center. 

The Wireless Troubleshooting Center page appears. Choose the link that best suits your troubleshooting 
needs.