Cisco Cisco Aironet 350 Workgroup Bridges 릴리즈 노트

Release Notes for Cisco Aironet 350 Series Workgroup Bridges Running Firmware Version 8.85

OL-5217-01

Step 9

To download the current release, click the Current Release (Recommended) radio button.

Step 10

Click Submit. The software selector displays the categories you selected and lists the available
download methods.

Step 11

Review your selections. If you want to change anything, use your browser’s back button to return to the
previous software selector page.

Step 12

When you are ready to download the firmware, go to the Standard Installation section and click
Workgroup Bridge Bundle. The Aironet Software Selector encryption authorization form appears.

Step 13

Complete the required fields on the authorization form and check the boxes indicating agreement with
the download agreement.

Step 14

Type your name exactly as you entered it in the First Name and Last Name fields.

Step 15

Click Submit. The Software Download Software License Agreement page appears.

Step 16

Review the license agreement and click Accept. The File Download window appears.

Step 17

Click Save and select a location on your system to download the file to.

Installation Notes

The upgrade patch and firmware must be installed concurrently. Do not begin the process unless you
intend to complete it in one operation.

Running the Upgrade Patch

The procedure below lists the steps to install the patch using the Windows command prompt. If you
prefer, you can run the patch from the Windows task bar by selecting Start > Run. Make sure you
include the workgroup bridge’s IP address following the command in the Run field. If you use this
method to run the patch, the window may close too fast and prevent you from seeing all the installation
status messages the patch displays.

Follow these steps to install the upgrade patch from the Windows command prompt:

Step 1

Identify a Windows-based PC on the same network segment as the workgroup bridge you intend to
upgrade.

Step 2

Identify the IP address of the workgroup bridge you intend to upgrade.

Note

If you do not know the workgroup bridge’s IP address, your system administrator can provide it
for you or you can use the IP Setup Utility (IPSU) to retrieve it. IPSU is available on Cisco.com
at the following URL:

http://www.cisco.com/pcgi-bin/tablebuild.pl/aironet_350_wgb

Note

If you use IPSU, you will also need the workgroup bridge’s MAC address. The MAC address is
located on the label on the back of the workgroup bridge.

Step 3

On your Windows-based PC, open a command prompt window.