Cisco Cisco Aironet 350 Wireless Bridge 기술 매뉴얼

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Network Diagram
 Basic Operational Failure
 Connectivity Failure
      Data Rate Mismatch
 Intermittent Connectivity Issues in Wireless Bridges
 Poor Throughput
      Software
      Use Statistical Tools
      Error Statistics
      Error Statistics on the Cisco Aironet 340 Series Bridge
 Other Basic Troubleshooting Information with the Wireless Bridge
 Reset to the Default Configuration
 Manage a Firmware Failure/Corruption
 Telnet Session Hangs or Does Not Start During Heavy Traffic
 Bridge Is Unable to Detect Simultaneous Image Downloads
 Carrier Busy Test Fails
 Configuration of Root/Non−Root Bridge
 The Power Injector
 Online Help for IOS Bridges and IOS Access Points
 Conclusion
 Related Information

This document provides information to help identify and troubleshoot common problems in a wireless bridged
network. Common problems fall into three categories: basic operational failure, connectivity failure, and poor
throughput.

There are no specific requirements for this document.

Cisco Aironet equipment operates best when all components are loaded with the latest versions of software.
Upgrade to the latest versions of the software early in the troubleshooting process.