Cisco Cisco Aironet 350 Wireless Bridge 기술 매뉴얼
You can download the latest software and drivers at the Wireless Software Center.
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Note: The information in this document applies to all platforms of wireless bridges unless it is mentioned
specifically.
specifically.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Network Diagram
This document uses this network topology:
Basic Operational Failure
These are the symptoms of basic operational failure:
Negative or unidentifiable LED patterns
Refer to Bridge Normal Mode LED Indications for more information on the regular LED patterns on
wireless bridges.
wireless bridges.
•
Error messages across the console
•
Constant rebooting
•
These problems are usually catastrophic, and frequently require that you replace the bridge. Contact Cisco
Technical Support with specific details about the operational failure. Have the serial number of the bridge and
a ship−to address available in case the Cisco Technical Support engineer determines that hardware
replacement is required.
Technical Support with specific details about the operational failure. Have the serial number of the bridge and
a ship−to address available in case the Cisco Technical Support engineer determines that hardware
replacement is required.
You can open a service request online through the TAC Service Request Tool (registered customers only) for
equipment under warranty or under a support contract.
equipment under warranty or under a support contract.