Cisco Cisco Aironet 1400 Wireless Bridge 릴리즈 노트

Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the CLI:

If your access point has two radios, repeat these steps for the second radio. Use the no form of the 
shutdown command to enable the radio. 

The following new feature is included in Cisco IOS Release 12.4(10B)JDA:

System log message enhancement

With this release, system logging functions are enhanced with the addition of the following new system 
messages:

Error Message %DOT11-4-LOADING_RADIO: Interface [chars], loading the radio firmware 
([chars]) 

The radio has been stopped to load new firmware.

Recommended Action: No action is required.

Error Message %LINEPROTO-5-UPDOWN: Line protocol on Interface [chars], changed state 
to [chars] 

The data link level line protocol has changed state.

No action is required.

Error Message %SYS-5-RESTART: System restarted --[chars] 

A reload or restart was requested.

Notification message only. No action is required.

Enter global configuration mode.

interface dot11radio {0 | 1}

Enter interface configuration mode for the radio interface. The 
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.

Disable the radio port.

Return to privileged EXEC mode.

copy running-config startup-config (Optional) Save your entries in the configuration file.