Cisco Cisco Aironet 1600i Access Point 기술 매뉴얼

Access Point as a Workgroup Bridge
Configuration Example

Document ID: 68472

Contributed by Ishaan Sanji, Cisco TAC Engineer.
May 14, 2014

Contents

Introduction
Prerequisites
Requirements
Components Used
Background Information
Configure
Network Diagram
Configurations
Configure the Workgroup Bridge
GUI Instructions
CLI Instructions
Configure the Root AP
GUI Instructions
CLI Instructions
Verify
Troubleshoot

Introduction

This document provides a sample configuration that configures an access point (AP) to function as a
workgroup bridge (WGB) with use of the GUI and the CLI.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

Configuration of basic parameters on Cisco standalone APs

•

Basic wireless concepts

•

Components Used

The information in this document is based on these software and hardware versions:

Cisco Aironet 3600 Series AP that runs Cisco IOS

Software Release 15.2(4)JB4 as a workgroup

bridge

•

Cisco Aironet 1260 Series AP that runs Cisco IOS Software Release 15.2(4)JB4 as a root access point

•

The information in this document was created from the devices in a specific lab environment. All of the