Cisco Cisco Aironet 1600i Access Point 기술 매뉴얼
Configure
Network Diagram
Configurations
This setup uses two APs, with a 1262 AP that acts as a root AP and a 3602 AP configured as a Workgroup
bridge. It uses an open SSID called wgb for the WGB to associate to the root AP. Wireless clients are
associated to the root AP. Wired clients connect through a switch to the AP that is configured as a WGB.
bridge. It uses an open SSID called wgb for the WGB to associate to the root AP. Wireless clients are
associated to the root AP. Wired clients connect through a switch to the AP that is configured as a WGB.
Configure the Workgroup Bridge
GUI Instructions
In order to create the SSID on the WGB, navigate to Security > SSID Manager.
1.