Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Wireless Client Requirements

16

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

If your network uses VLANs, you might need to configure the management VLAN ID 
or untagged VLAN ID on the access point for it to work with your network. 

For information about how to configure VLAN information, see 

If your network uses Dynamic WEP port security for network access control, you 
must configure the 802.1X supplicant information on the access point. For 
information about how to configure the 802.1X user name and password, see 

.

Click System Information to view the device information. For more information, see 

.

As new versions of the Access Point software become available, you can upgrade 
the software on your devices to take advantage of new features and 
enhancements. For more information, see 

.

For information on how to backup and restore the configuration, go to 

For information about the wireless radio settings, see 

.

To configure the SSID, Guest Access, and Security Configuration, see 

.

The access point provides wireless access to any client with a properly 
configured Wi-Fi client adapter for the 802.11 mode in which the access point is 
running. The access point supports multiple client operating systems. Clients can 
be laptop or desktop computers, personal digital assistants (PDAs), or any other 
hand-held, portable or stationary device equipped with a Wi-Fi adapter and 
supporting drivers.