Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼
Getting Started
Configuring Security on the Wireless Access Point
Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide
19
1
!
CAUTION
By default, no security is in place on the access point, so any wireless client can
associate with it and access your LAN, including unauthorized devices. An
important next step is to configure security. Continue with
associate with it and access your LAN, including unauthorized devices. An
important next step is to configure security. Continue with
for more information.
Configuring Security on the Wireless Access Point
You configure secure wireless client access by configuring security for each
virtual access point (VAP) that you enable. You can configure up to 16 VAPs per
wireless radio that simulate multiple access points in one physical access point.
For each VAP, you can configure a unique security mode to control wireless client
access.
virtual access point (VAP) that you enable. You can configure up to 16 VAPs per
wireless radio that simulate multiple access points in one physical access point.
For each VAP, you can configure a unique security mode to control wireless client
access.
Each wireless radio has 16 VAPs, with VAP IDs from 0-15. VAP 0, VAP 1, and VAP 2
have different default settings than VAPs 3-15. By default, VAP 0, VAP 1, and VAP 2
are enabled.
have different default settings than VAPs 3-15. By default, VAP 0, VAP 1, and VAP 2
are enabled.
VAP0 has the following default settings:
•
VLAN ID: 1
•
SSID: cisco-data
•
Broadcast SSID: Enabled
•
Security: None
•
MAC Authentication Type: Disabled
•
Station Isolation: Disabled
•
HTTP Redirect: Disable
VAP1 has the following default settings:
•
VLAN ID: 100
•
SSID: cisco-voice
•
Broadcast SSID: Enabled
•
Security: None
•
MAC Authentication Type: Disabled