Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Getting Started

Connecting the Access Point to a PC

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

Administration PC IP Address

We recommend that if you are starting from the default configuration or this is the
first time the device will be configured that you configure the device before you
deploy it in the network by using the access point default static IP address
(

192.168.10.10). To do so, the PC IP address must be on the same subnet as the

access point.

Verify that your PC IP address is set to an address on the same subnet as the
access point:

STEP 1

From the Windows Start menu, choose Settings > Control Panel.

STEP 2

On the Control Panel dialog box, click Network.

STEP 3

In the Network dialog box select TCP/IP for your PC Ethernet card, then click
Properties.

STEP 4

In the IP Address window, click Specify an IP address.

STEP 5

In the IP Address field, enter an IP address that is in the same subnet as the access
point IP address. (The default access point IP address is

192.168.10.10. The

default subnet mask is 255.255.255.0.) For example, you can set the:

PC IP address to 192.168.10.250
PC IP subnet mask to 255.255.255.0

STEP 6

In the Subnet Mask field, type 255.255.255.0.

STEP 7

Click OK.

STEP 8

If you are prompted to restart your PC, click Yes.

Connecting the Access Point to a PC

To configure the access point, you can connect the access point directly to an
administration PC or through the network to an administration PC.

If you are not using CCA to configure the access point, we recommend that you configure
the device before deploying it in the network by following the instructions in the

“Connect

the Access Point to an Administration PC”

section. Otherwise, follow the instructions in

the

“Connecting the Access Point to the PC through a Network Connection”