Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

1

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

1

 

The Cisco AP541N Dual-band Single-radio Access Point is an advanced, 
standards-based solution for wireless networking in businesses of any size. The 
access point enables wireless local area network (WLAN) deployment while 
providing state-of-the-art wireless networking features.

The access point operates in Standalone Mode. In Standalone Mode, the access 
point acts as an individual access point in the network, and you manage it by using 
the Access Point Configuration Utility, or SNMP. 

This document describes how to perform the setup, management, and 
maintenance of the access point in 

Standalone Mode

. Before you power on a new 

access point, review the following sections to check required hardware and 
software components, client configurations, and compatibility issues. Make sure 
you have everything you need for a successful launch and test of your new or 
extended wireless network.

This chapter contains the following topics:

•

 

•

•

•

•

•

To manage the access point by using the Web interface, the access point needs 
an IP address. If you use VLANs or IEEE 802.1X Authentication (port security) on 
your network, you might need to configure additional settings on the access point 
before it can connect to the network.