Cisco Cisco AP541N Wireless Access Point 설치 가이드

 

e.

In the IP Address field, enter an IP address that is in the same 
subnet as the access point IP address. (The default access 
point IP address is 

.) For example, you can set 

the:

PC IP address to 192.168.10.250

PC IP subnet mask to 255.255.255.0

f.

In the Subnet Mask field, type 255.255.255.0.

g. Click OK. Your changes are applied to the PC configuration.

h.

If you are prompted to restart your PC, click Yes.

Connect an Ethernet cable to the Ethernet port on the PC.

Connect the other end of the Ethernet cable to the Cisco AP541N 
Ethernet port. 

Power on the access point. 

Open a Web browser window. If you are prompted to install an 
Active-X plug-in when connecting to the device, follow the 
prompts to accept the plug-in.

Enter the Cisco AP541N IP address in the address bar and press 
Enter. For example, http://

. 

The Access Point Configuration Utility

 

displays. 

Enter the default login information:

Username is cisco 

Default password is cisco (passwords are case sensitive) 

The Getting Started window displays. You can now configure the 
device for you specific needs. 

Next, we recommend that you:

Click Change Administrator Password on the Getting Started 
page to change the password.

Click SSID, Guess Access, and Security Configuration to 
configure the SSID and enable wireless security.

Click Radio Settings to turn on the Radio Interface. (The radio 
is disabled by default to prevent unauthorized users from 
accessing the network before you have enabled wireless 
security on the Cisco AP541N.)