Cisco Cisco AP541N Wireless Access Point 설치 가이드

 

If you are not using DHCP on your network, click Change IP 
Address to set the Connection Type on the access point to 
Static and change the Static IP Address and Subnet Mask to an 
IP address and subnet mask that matches the IP addressing 
scheme in your network, so an unknown IP address is not 
assigned to the access point. 

When you click Apply, you will lose connectivity. You can 
reconnect by using the new IP address and password.

Click Upgrade Software to update the Cisco AP541N with the 
latest version of the software.

These tasks can be accomplished by using the procedures in the 
Cisco Small Business AP541N Access Point Administration 
Guide.

If the access point is connected to the network, the 
Cisco AP541N has not been set to use a static IP address, 
and there is a DHCP server on the network, a new IP address 
will be assigned to the access point. To modify the 
configuration you must discover the IP address assigned to 
the Cisco AP541N by using the DHCP server.

We recommend that you return your PC to its original settings.

Use Cisco Configuration Assistant 2.1 or higher (CCA) to configure the 
access point when it is deployed in a Cisco Smart Business 
Communications System (SBCS) network with a UC520 or SR520. 

This procedure assumes you are familiar with CCA. You can find additional 
information about CCA at