Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Configuring SNMP on the Access Point

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

112

 

After you configure the SNMPv3 Groups settings, you must click Apply to apply the 
changes and to save the settings.

Select one of the following security levels for the 
group:

noAuthentication-noPrivacy—No authentication and 
no data encryption (no security).

Authentication-noPrivacy—Authentication, but no data 
encryption. With this security level, users send SNMP 
messages that use an MD5 key/password for 
authentication, but not a DES key/password for 
encryption.

Authentication-Privacy—Authentication and data 
encryption. With this security level, users send an MD5 
key/password for authentication and a DES key/
password for encryption. 

For groups that require authentication, encryption, or 
both, you must define the MD5 and DES key/
passwords on the SNMPv3 Users page.

Select the write access to management objects (MIBs) 
for the group:

write-all—The group can create, alter, and delete MIBs.

write-none—The group is not allowed to create, alter, or 
delete MIBS.

Select the read access to management objects (MIBs) 
for the group:

view-all—The group is allowed to view and read all 
MIBs.

view-none—The group cannot view or read MIBs.

This field shows the default groups and the groups 
that you have defined on the access point. To remove 
a group, select the group and click Remove.