Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼
SNMP
SNMP Targets
115
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
5
SNMP Targets
SNMPv3 Targets send trap messages to the SNMP manager. Each target is
identified by a target name and associated with target IP address, UDP port, and
SNMP user name.
identified by a target name and associated with target IP address, UDP port, and
SNMP user name.
Figure 25 SNMPv3 Target
Table 29 SNMPv3 Targets
Field
Description
IP Address
Enter the IP address of the remote SNMP manager to receive
the target.
the target.
Port
Enter the UDP port to use for sending SNMP targets.
Users
Enter the name of the SNMP user to associate with the target.To
configure SNMP users, see
configure SNMP users, see
SNMPv3
Targets
Targets
This field shows the SNMPv3 Targets on the access point. To
remove a target, select it and click Remove.
remove a target, select it and click Remove.