Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼
Wireless
Configuring the Wireless Distribution System
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
94
4
If you select None as your preferred WDS encryption option, you will not be asked
to fill in any more fields on the WDS page. All data transferred between the two
access point
to fill in any more fields on the WDS page. All data transferred between the two
access point
s
on the WDS link will be unencrypted.
NOTE
To disable a WDS link, you must remove the value configured in the Remote
Address field.
Address field.
WEP on WDS Links
describes the additional fields that appear when you select WEP as the
encryption type.
Table 21 WEP on WDS Links
Field
Description
Encryption
WEP
WEP
Select this option if you want to set WEP encryption on the
WDS link.
WDS link.
Key Length
If WEP is enabled, specify the length of the WEP key:
64 bits
128 bits
Key Type
If WEP is enabled, specify the WEP key type:
ASCII
Hex
Characters
Required
Required
The number of characters required in the WEP key. The field
updates automatically based on how you set Key Length and
Key Type.
updates automatically based on how you set Key Length and
Key Type.
WEP Key
Enter a string of characters. If you selected ASCII, enter any
combination of 0–9, a–z, and A–Z. If you selected HEX, enter
hexadecimal digits (any combination of 0–9 and a–f or A–F).
These are the RC4 encryption keys shared with the stations
using the access point.
combination of 0–9, a–z, and A–Z. If you selected HEX, enter
hexadecimal digits (any combination of 0–9 and a–f or A–F).
These are the RC4 encryption keys shared with the stations
using the access point.