Cisco Cisco WAP4410N Wireless-N Access Point - PoE Advanced Security 릴리즈 노트

Release Notes for the Cisco WAP4410N Access Point Firmware Version 2.0.7.8 

5

•

CSCtz59478—When enabling or disabling the VLAN or QoS features, your 
Internet connection will be lost. Workaround: After configuring the VLAN or 
QoS features, unplug the power adapter or PoE cable, and then plug it back 
in.

•

When using the WPS feature and you are still using the default SSID of 
ciscosb, the system automatically changes the ciscosb SSID to Network-
"MAC-ADDRESS" for security purposes. If you prefer to retain your SSID 
and use WPS at the same time, configure a unique SSID before invoking 
WPS.

•

The WAP4410N now has a Setup Wizard to aid in initial configuration.

•

The WPS PIN-External Register mode stops attempting to register a client 
after 30 failed attempts.

The firmware was updated and the following was fixed in firmware version 2.0.4.1.

•

Updated LSDK and WLAN driver.

•

Added Ethernet Duplex Mode and Date Rate settings.

•

Fixed WDS connection issue when using WPA/WPA2 security.

•

Fixed memory leak issue.

These known issues were identified in firmware version 2.0.4.1.

•

Space(s) in the SSID are allowed but currently they will cause the SSID to 
display as a blank string. Selecting the blank SSID with connect and feature 
performance is not affected.

•

There are known issues regarding wireless isolation, affecting both 
between SSIDs and within SSIDs. 

Workaround: None.

•

Google Chrome browser does not support the loading of the firmware 
upgrade.