Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼
ACL
ACL Status
Cisco WAP131 and WAP351 Administration Guide
145
8
•
Bandwidth Limit Down—Enter the maximum allowed transmission rate
from the WAP device to the client in bits per second (bps). The valid range is
from 0 to 300 Mbps.
from the WAP device to the client in bits per second (bps). The valid range is
from 0 to 300 Mbps.
•
Bandwidth Limit Up—Enter the maximum allowed transmission rate from
the client to the WAP device in bits per second (bps). The valid range is from
0 to 300 Mbps.
the client to the WAP device in bits per second (bps). The valid range is from
0 to 300 Mbps.
•
ACL Type—Choose the type of ACL that is applied to traffic entering the
WAP device, which can be one of these options:
WAP device, which can be one of these options:
-
IPv4—Examines the IPv4 packets that match the ACL rules.
-
IPv6—Examines the IPv6 packets that match the ACL rules.
-
MAC—Examines the Layer 2 frames that match the ACL rules.
-
None—Does not examine the traffic entering the WAP device.
•
ACL Name—Choose the name of the ACL applied to traffic entering the
WAP device.
WAP device.
When a packet or frame is received by the WAP device, the ACL rules are
checked for a match. The packet or frame is processed if it is permitted and
discarded if it is denied
checked for a match. The packet or frame is processed if it is permitted and
discarded if it is denied
STEP 4
Click Save. The changes are saved to the Startup Configuration.
NOTE
An interface can be bound with either a DiffServ policy or an ACL, but not both.
NOTE
IPv6 type is not supported at the Ethernet ports of the Cisco WAP351.
ACL Status
The ACL Status page shows the details for different types of ACL rules.
To view the ACL status, select ACL > ACL Status.
The following information is displayed:
•
ACL Name—The name of the ACL.
•
Interface Bound—The interface to which the ACL has been associated.
•
Rule No.—The number of the rule that the ACL contains.