Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

User Accounts

Cisco WAP131 and WAP351 Administration Guide

37

To add a new user:

Select Administration > User Accounts.

The User Account Table shows the currently configured users. The user cisco is 
preconfigured in the system and has Read/Write privileges.

All other users can have Read Only access, but not Read/Write access.

Click Add. A new row of text boxes appears.

Check the box for the new user and click Edit.

Enter a User Name between 1 to 32 alphanumeric characters. Only numbers 0 to 
9 and letters a to z (upper or lower) are allowed for user names.

Enter a New Password between 1 and 64 characters and then enter the same 
password in the Confirm New Password field.

The Password Strength Meter field indicates the password strength as follows:

•

Red—The password fails to meet the minimum complexity requirements.

•

Orange—The password meets the minimum complexity requirements but 
the password strength is weak.

•

Green—The password is strong.

Click Save. The changes are saved to the Startup Configuration.

To delete a user, select the check box next to the user name and click Delete. To 
save your deletion permanently, click Save when complete.

To change a user password:

Select Administration > User Accounts.

Select the user to configure and click Edit.

Enter a New Password between 1 and 64 characters and then enter the same 
password in the Confirm New Password field.