Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

Time Settings

Cisco WAP131 and WAP351 Administration Guide

38

The Password Strength Meter field indicates the password strength as follows:

•

Red—The password fails to meet the minimum complexity requirements.

•

Orange—The password meets the minimum complexity requirements but 
the password strength is weak.

•

Green—The password is strong.

Click Save. The changes are saved to the Startup Configuration.

If you change your password, you must log in again to the system.

A system clock provides a network-synchronized time-stamping service for 
software events such as message logs. You can configure the system clock 
manually or configure the WAP device as a Network Time Protocol (NTP) client 
that obtains the clock data from a server.

Use the Time Settings page to set the system time manually or to configure the 
system to acquire its time settings from a preconfigured NTP server. By default, 
the WAP device is configured to obtain its time from a predefined list of NTP 
servers.

The current system time appears at the top of the page, along with the System 
Clock Source option.

To automatically acquire the time settings from a NTP server:

Select Administration > Time Settings.

In the System Clock Source area, choose Network Time Protocol (NTP).

Configure these parameters: 

•

NTP Server(1 through 4)/IPv4/IPv6 Address/Name—Specify the IPv4 
address, IPv6 address, or host name of an NTP server. A default NTP server 
is listed.