Cisco Cisco WAP131 Wireless-N Dual Radio Access Point with PoE 관리 매뉴얼

IPv4 Setting

Cisco WAP131 and WAP351 Administration Guide

69

•

LAN1 - LAN5—Each port should have at most one untagged VLAN. The 
options are: 

-

Untagged—The port is a member of the VLAN. A packet of the VLAN 
sent out from the port will be untagged. A untagged packet received by 
the port will be classified to the VLAN (tagged).

-

Tagged—The port is a member of the VLAN. A packet of the VLAN sent 
out from the port will be tagged with the VLAN header.

-

Excluded—The port does not belong to the VLAN.

The VLAN ID 1 cannot be deleted. If a port (wired or wireless) related to the VLAN 
has been deleted, the WAP device will set its VLAN ID to 1 automatically.

After new settings are saved, the corresponding processes may be stopped and 
restarted. When this condition happens, the WAP device may lose connectivity. We 
recommend that you change the WAP device settings when a loss of connectivity 
will least affect your wireless clients.

Use the IPv4 Setting page to configure the static or dynamic IPv4 address 
assignment.

To configure the IPv4 address settings:

Select LAN > IPv4 Setting.

Configure these IPv4 settings:

•

Connection Type—By default, the DHCP client on the WAP device 
automatically broadcasts the requests for network information. If you want to 
use a static IP address, you must disable the DHCP client and manually 
configure the IP address and other network information.

Choose one of these options: 

-

DHCP—The WAP device acquires its IP address from a DHCP server on 
the LAN.

-

Static IP—Manually configure the IPv4 address. The IPv4 address 
should be in a form similar to xxx.xxx.xxx.xxx (192.0.2.10).