Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

After the access point reboots, reconfigure the access point using the GUI or the CLI.

This section lists new features in Cisco IOS Release 12.3(7)JX. 

 lists the features that are 

supported on the devices that support this release. 

This feature allows an access point to communicate with a wireless LAN controller in order to receive 
the LWAPP image mandated by the controller. New LWAPP access points or access points being 
upgraded from autonomous to LWAPP mode use the LWAPP-recovery support feature to receive their 
LWAPP image from the controller. This release is also used as a recovery image in case the full LWAPP 
image becomes corrupted. The LWAPP-recovery support feature limits access point functionality to just 
that which is necessary to download a complete LWAPP image; for example, the radios are disabled on 
access points running the LWAPP-recovery support feature.

This section contains information you should keep in mind when installing access points.

This section provides information on installing 1200 series access points in environmental air space, 
such as above suspended ceilings.

Cisco Aironet 1130AG and 1200 Series Access Points provide adequate fire resistance and low 
smoke-producing characteristics suitable for operation in a building's environmental air space, such as 
above suspended ceilings, in accordance with Section 300-22(C) of the National Electrical Code (NEC) 
and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 1, C22.1.

The power injector does not provide fire resistance and low smoke-producing characteristics and is not 
intended for use in extremely high or low temperatures or in environmental air spaces such as above 
suspended ceilings.

LWAPP Upgrade and 
Recovery Support 

x

x

x

x