Cisco Cisco Aironet 1240 AG Access Point 설치 가이드
6
EU Directives 1999/5/EC & 93/42/ECC - Compliance Information
78-17250-04
Changing Output Power
Changing Output Power
AIR-AP1131AG-E-K9 and AIR-AP1242AG-E-K9
Connect your PC to the access point's Ethernet port and follow these steps to change the output power
to meet the local regulations.
to meet the local regulations.
Step 1
Open your Internet browser. You must use Microsoft Internet Explorer 5.x or later.
Step 2
Enter the access point's IP address in the browser address line and press Enter. An Enter Network
Password screen appears.
Password screen appears.
Step 3
Enter the username and password and press Enter. The Summary Status page appears.
Note
The default username and password are both Cisco. They are case-sensitive.
Step 4
In the Network Interfaces section, select the radio you want to change. The status page for that radio
appears.
appears.
Step 5
Select the Settings tab. The Settings page appears.
Step 6
Scroll down to the Transmitter Power section.
Step 7
Select the appropriate power level.
5-GHz bands.
AIR-ANT5160V-R
6
17
Omni
AIR-ANT5170P-R
7
14
Diversity patch
AIR-ANT5195P-R
9.5
11
Patch
Table 2
5-GHz Dedicated Antennas and Maximum Allowed Conducted
Power Settings
Power Settings
Antenna
Cisco Part Number
Cisco Part Number
Antenna Gain
(dBi)
(dBi)
Maximum
Power
Setting (dBm) Antenna Description
Power
Setting (dBm) Antenna Description
Table 3
Available Output Power Levels
802.11b/g 2.4-GHz Radio
(dBm)
(dBm)
802.11a 5-GHz Radio
(dBm)
(dBm)
14
11
8
5
2
-1
11
8
5
2
-1
17
15
14
11
8
5
2
-1
15
14
11
8
5
2
-1