Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

The following example configures severity level 3 (error conditions) for the facility system, event reload 
error messages:

ap(config)# logging facility system event reload severity errors

The following example configures severity level 1 (immediate action needed) for the facility dot11, event 
radio failed error messages:

ap(config)# logging facility dot11 radio failed severity alerts

Using the no form of the command removes the configured severity level from the configuration and 
reverts to the default severity for the event.

This section lists open and resolved caveats for access points.

These caveats are open in Cisco IOS Release 12.3(8)JED:

CSCsv82129—Bad cookie error msg appears in workgroup bridge mode running open.

CSCsr79628— Number of supported BSSID not shown on access point GUI.

The show controllers command reports the number of BSSIDs supported:
“Number of supported simultaneous BSSID on Dot11RadioX: 16”

The above information cannot be seen in the access point GUI.

CSCsz85193— Crash and traceback observed with qos traffic class

Crash and traceback is observed in access point while configuring radio interface QoS traffic class 
parameters.

CSCtb24821—dir /all /recursive all-filesystems CLI causes AP to hang.

Access points hang if these commands are entered on the console:

CSCtb55037—Workgroup bridge crashes while shutting and unshutting the radio.

CSCtb70386—Crash observed with scanner mode AP in RF alpha.

CSCtb60584—Client and access point communication stop at session key update with heavy traffic.

At session key timeout the station executes session key update the server side windows event log is 
updated and it shows that session key update completes successfully. After that moment the Chariot 
and ping stops. On the access point side the following is shown: “%DOT11-4-CCMP_REPLAY: 
AES-CCMP TSC replay was detected on a packet (TSC 0xD89FF8) received from 
001d.7305.0008”. Eventually the access point deauthenticates the station.

6. informational

Informational messages

7. debugging

Debugging messages