Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
16
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JED
OL-20669-01
Caveats
Conditions:[environment] STA:
–
OS: XP+SP3
–
HW: CB72 (2x2)
–
Driver: 7.6.1.264
–
WZC: WPA2-EAP:PEAP(AES)
Access Point:
–
Software 12.410b.JDA3
–
Cisco AIR-AP1252AG-P-K9
–
Security: WPA2-EAP:PEAP(AES)
–
2.4GHz/5GHz
–
HT20/40
–
Session key update: 10 min.
–
Group key update: 5 min.
Radius Server:
–
Windows Server 2008
–
STA/CB72---------Cisco AP1252--------Radius Server
•
CSCsz16427—Image recovery process hangs on hard reset.
The bootable image in flash is not getting erased and the image recovery process hangs after
pressing the reset button for more than 20 seconds.
pressing the reset button for more than 20 seconds.
Workaround: Erase the image in flash manually and then hard reset the access point.
•
CCSCtc07598—7921 phone disconnects in random fashion and displays “CM down -feature
disable” message.
disable” message.
Two 7921 VOIP phones connected to a 1250 or 1130 access point begin a conversation. The call
works fine for 45 - 60 minutes but then the call drops and the following message in one of the 7921
phones displays “CM down.feature disable” (receiver phone mostly). After ending the call, the 7921
phone keeps trying to connect the CM IP address, then the phone reassociates with the access point
and repeats the cycle.
works fine for 45 - 60 minutes but then the call drops and the following message in one of the 7921
phones displays “CM down.feature disable” (receiver phone mostly). After ending the call, the 7921
phone keeps trying to connect the CM IP address, then the phone reassociates with the access point
and repeats the cycle.
Resolved Caveats
These caveats are resolved in Cisco IOS Release 12.3(8)JD:
•
CSCtb64826— CCKM FastRoaming no longer fails when workgroup bridge is used as supplicant.
•
CSCso07171—Fast roaming no longer fails when CCKM enabled on a workgroup bridge/access
point.
point.
•
CSCsu83607—hotstandby status now shows correct status.
•
CSCsu86520—Power level notations are no longer missing in the GUI for 5.8-MHz radio.
•
CSCsv04096—Clients are now able to join for single basic rate settings.
•
CSCsv60216—Encryption flag settings are now cleared when SSID is deleted.
•
CSCsv77658—Access point reset from watchdog timer no longer expires.
•
CSCsv80123—Non-root bridge GUI now displays attributes.