Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
2
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JEB
OL-11737-01
Introduction
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
You can configure and monitor 1100, 1200, and 1230, series access points using the command-line
interface (CLI), the web-browser interface, or Simple Network Management Protocol (SNMP).
interface (CLI), the web-browser interface, or Simple Network Management Protocol (SNMP).
System Requirements
Cisco IOS Release 12.3(8)JEB is a general maintenance release that concentrates on bug fixes and
includes minor features. You can install Cisco IOS Release 12.3(8)JEB on any Cisco Aironet access
point or 1300 series access point/bridge.
includes minor features. You can install Cisco IOS Release 12.3(8)JEB on any Cisco Aironet access
point or 1300 series access point/bridge.
Note
Software upgrades fail when you use the web-browser interface to install Cisco IOS Release 12.3(8)JEB
on 1200 series access points. The image size exceeds the access point’s 4-MB restriction for software
upgrades. Use TFTP to upgrade your access point to this release. For complete instructions on using
TFTP to upgrade access point software, see the “Working with Software Images” section in the Cisco
IOS Software Configuration Guide for Cisco Aironet Access Points. Click this link to browse to that
document:
on 1200 series access points. The image size exceeds the access point’s 4-MB restriction for software
upgrades. Use TFTP to upgrade your access point to this release. For complete instructions on using
TFTP to upgrade access point software, see the “Working with Software Images” section in the Cisco
IOS Software Configuration Guide for Cisco Aironet Access Points. Click this link to browse to that
document:
You can also install this release on 1200 series access points that have been converted to run Cisco IOS
software. You can tell whether an access point runs VxWorks or Cisco IOS software by looking at the
GUI: the GUI on an access point running VxWorks has a yellow and red color scheme, and the GUI on
an access point running Cisco IOS software has a green, light-green, and black color scheme.
software. You can tell whether an access point runs VxWorks or Cisco IOS software by looking at the
GUI: the GUI on an access point running VxWorks has a yellow and red color scheme, and the GUI on
an access point running Cisco IOS software has a green, light-green, and black color scheme.
Your 1200 series access point must run one of these VxWorks versions before you can convert to IOS
software: 12.03T, 12.02T1, 12.01T1, 12.00T, 11.56, or 11.54T. If your access point runs version 12.04,
you must downgrade to a supported VxWorks version before upgrading to IOS software.
software: 12.03T, 12.02T1, 12.01T1, 12.00T, 11.56, or 11.54T. If your access point runs version 12.04,
you must downgrade to a supported VxWorks version before upgrading to IOS software.
The conversion upgrade image for 1200 series access points installs Cisco IOS Release 12.2(13)JA2 on
your 1200 series access point.
your 1200 series access point.
Note
Do not attempt to load an IOS image on 1200 series access points that have not been converted.
Finding the IOS Software Version
To find the version of IOS software running on your access point, use a Telnet session to log into the
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.3(8)JA:
access point and enter the show version EXEC command. This example shows command output from
an access point running Cisco IOS Release 12.3(8)JA:
ap1200>show version
Cisco Internetwork Operating System Software
IOS (tm) C1200 Software (C1200-K9W7-M), Version 12.3(8)JA
Copyright (c) 1986-2006 by Cisco Systems, Inc.