Cisco Cisco Aironet 702W Access Point 설치 가이드
14
Step 2
For wall mounting, drill pilot holes at the mounting hole locations you have marked, and use appropriate anchors as
required.
required.
Note
The pilot hole size varies according to the material, and its thickness, you are fastening. Cisco recommends that you
test the material to determine the ideal hole size for your mounting application.
test the material to determine the ideal hole size for your mounting application.
Step 3
Feed the cable(s) from the junction box / wall through the large center cable access hole in the bracket, with the words
“MOUNT ARROWS UP” facing you as shown in
“MOUNT ARROWS UP” facing you as shown in
Figure 8
Bracket Mounting Direction
Step 4
Position the mounting bracket mounting holes (with the words “MOUNT ARROWS UP” facing you) over the screw
holes.
holes.
Step 5
Insert a screw into each mounting hole and tighten.
Note
Screws supplied in kit may not be appropriate for all mounting options.
1
Security Screw Hole on Wall Mounting Bracket
2
Kensington Lock Slot on Wall Mounting Bracket
1
35250
8
2