Cisco Cisco Aironet 1200 Access Point 릴리즈 노트
8
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(7)JA3
OL-10095-01
Installation Notes
Figure 2
Improper Power Configuration Using Two Power Sources
Configuring Power for 1130AG and 1240AG Access Points
The 1130AG and 1240AG access points disable the radio interfaces when the unit senses that the power
source to which it is connected does not provide enough power. Depending on your power source, you
might need to enter the power source type in the access point configuration. Use the System Software:
System Configuration page on the web-browser interface to select a power option.
source to which it is connected does not provide enough power. Depending on your power source, you
might need to enter the power source type in the access point configuration. Use the System Software:
System Configuration page on the web-browser interface to select a power option.
shows the
System Power Settings section of the System Configuration page.
Figure 3
Power Options on the System Software: System Configuration Page
Using the AC Power Adapter
If you use the AC power adapter to provide power to the access point, you do not need to adjust the access
point configuration.
point configuration.
Using a Switch Capable of IEEE 802.3af Power Negotiation
If you use a switch to provide Power over Ethernet (PoE) to the access point and the switch supports the
IEEE 802.3af power negotiation standard, select Power Negotiation on the System Software: System
Configuration page.
IEEE 802.3af power negotiation standard, select Power Negotiation on the System Software: System
Configuration page.
Universal
power supply
SYST
RPS
DUPLX
MODE
SPEED
UTIL
STAT
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
23
24
10Base-T / 10
0Base-TX
100Base-FX
Catalyst 2950
SERIES
Switch with
inline power or
power patch panel
Access point
74329