Cisco Cisco Aironet 1200 Access Point 릴리즈 노트

Follow these steps to download a copy of the upgrade image:

Click this link to browse to the Cisco IOS Software Center on Cisco.com:

In the menu on the left, click Wireless Software to go to the Wireless LAN Software page. 

On the Wireless LAN Software page, click Option #2: Aironet Wireless Software Display Tables.

Under Cisco Aironet Access Point Firmware and Utilities, click Cisco Aironet 1200 Series (VxWorks).

Select the most recent release of the upgrade image, such as AP1200-Cisco-IOS-Upgrade-v1.img.

On the Encryption Authorization Form, enter the requested information, read the encryption 
information, and check the boxes that apply.

Click Submit.

Read and accept the terms and conditions of the Software License Agreement.

Select the upgrade image again to download it.

Save the upgrade image on your computer or on a local drive on your network.

If your 1200 series access point does not run IOS software, you can use the conversion tool and the 
upgrade image or the upgrade image alone to convert the access point system to IOS operation. 

Use the upgrade image with the conversion tool to maintain the current access point configuration after 
the conversion. Refer to the Cisco Aironet Conversion Tool for Cisco IOS Software for complete 
instructions on using the upgrade image with the conversion tool.

To convert to IOS operation without maintaining the current access point configuration, load the upgrade 
image on the access point just as you would when performing a firmware upgrade. 

Follow these steps to convert your access point system to IOS operation and reset the configuration to 
factory defaults:

Type the access point’s IP address in your browser’s address line to browse to the access point 
web-browser interface.

Click Setup on the Summary Setup screen.

Under Services, click Cisco Services.

Under Fully Update Firmware, click Through Browser.